Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter

The Niagara Cutter SC406 uncoated high-speed steel square end mill has a 30-degree helix angle for general-purpose machining on a range of materials. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end creates sharp, unrounded cuts.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit, and used for applications such as profiling and slotting. The cutting diameter tolerance is +0.001" to -0.000". This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter Product By : Niagara Cutter Sale Price : Check updated prices now

Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter #.

Features

Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish

High-speed steel is compatible with a variety of materials

Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials

Square nose end mills (also called square end) create sharp, unrounded cuts

Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

Are you looking for the best reviews in Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter? Congratulations! Check the feedback specs, features and reviews from customers, including more satisfaction for product reviews & Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter Check Price Update!

Various suggestions
• If you are interested in buying Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter try to find the full description and product details.
• I read the reviews of the product you need will give you a full understanding of the pros and cons too.
• You try to find a comparable and sometimes purchase items that will help in the selection.
• You can try to find and view the discussions.
• See the details for each product and information delivery.
• If you try to find product specifications.
• In general, as far as the internet Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter customers buy products or other sales and stores, shipping, gift ideas, city deals, sales, coupons, online, new, holiday, and comments, cheap and low prices were interested in the daily deals, bargains, special offers Niagara Cutter 40407 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter , best deals, discount coupons, good and hot deals, great deals, last minute deals and so best buy products ...Additional information